*linux-2.6.16-rc5+imac-patch[#d9440a00]
-dmesg
#pre{{
Linux version 2.6.16-rc5 (root@ubuntu) (gcc バージョン 4.0.2 20050808 (prerelease)
(Ubuntu 4.0.1-4ubuntu9)) #1 SMP Tue Mar 7 19:53:19 JST 2006
EFI: EFI v1.10 by Apple
ACPI=0x3fefd000 <6> ACPI 2.0=0x3fefd014 <6> SMBIOS=0x3fec9000
0MB HIGHMEM available.
1022MB LOWMEM available.
On node 0 totalpages: 261872
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 257776 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.4 present.
ACPI: RSDP (v002 APPLE ) @ 0x3fefd014
ACPI: XSDT (v001 APPLE Apple00 0x00000039 0x01000013) @ 0x3fefd120
ACPI: FADT (v003 APPLE Apple00 0x00000039 Loki 0x0000005f) @ 0x3fefb000
ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fefa000
ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef9000
ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef8000
ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef7000
ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef6000
ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3fef5000
ACPI: SSDT (v001 APPLE SataPri 0x00001000 INTL 0x20050309) @ 0x3fec6000
ACPI: SSDT (v001 APPLE SataSec 0x00001000 INTL 0x20050309) @ 0x3fec5000
ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x3fef0000
ACPI: DSDT (v001 APPLE iMac 0x00040001 INTL 0x20050309) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1 already used, trying 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10100000 (gap: 10000000:00400000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=atapi2:\vmlinuz-2.6.16-rc5
video=imacfb:i17 acpi=force irqpoll root=/dev/sda5 libata.atapi_enabled=1
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030720k/1047488k available (2767k kernel code, 13452k reserved, 776k data, 248k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oops: efitime: can't read time status: 0x80000007
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1833.334 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 3678.19 BogoMIPS (lpj=7356385)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Checking 'hlt' instruction... OK.
CPU0: Intel Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3666.76 BogoMIPS (lpj=7333529)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
CPU1: Intel Genuine Intel(R) CPU 1400 @ 1.83GHz stepping 08
Total of 2 processors activated (7344.95 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
ACPI: Subsystem revision 20060127
ACPI: Found ECDT
ACPI: Could not use ECDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 88300000-883fffff
PREFETCH window: 80000000-87ffffff
PCI: Bridge: 0000:00:1c.0
IO window: 1000-1fff
MEM window: 88200000-882fffff
PREFETCH window: 3ff00000-3fffffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 88100000-881fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: 88000000-880fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
audit: initializing netlink socket (disabled)
audit(2254587648.636:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Apple machine detected. MSI disabled
PCI: MSI quirk detected. MSI disabled.
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
imacfb: framebuffer at 0x80010000, mapped to 0xb8900000, using 10350k, total 16384k
imacfb: mode is 1440x900x32, linelength=5888, pages=1
imacfb: scrolling: redraw
imacfb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 180x56
fb0: IMAC VGA frame buffer device
Real Time Clock Driver v1.12ac
i8042.c: No controller found.
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v0.15 addr 0x88200000 irq 169 Yukon-EC (0xb6) rev 2
sky2 eth0: addr xx:xx:xx:xx:xx:xx
libata version 1.20 loaded.
ahci 0000:00:1f.2: version 1.2
PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xB881A100 ctl 0x0 bmdma 0x0 irq 185
ata2: SATA max UDMA/133 cmd 0xB881A180 ctl 0x0 bmdma 0x0 irq 185
ata3: SATA max UDMA/133 cmd 0xB881A200 ctl 0x0 bmdma 0x0 irq 185
ata4: SATA max UDMA/133 cmd 0xB881A280 ctl 0x0 bmdma 0x0 irq 185
ata1: SATA link down (SStatus 0)
scsi0 : ahci
ata2: SATA link down (SStatus 0)
scsi1 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113)
ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4063 85:7469 86:3f01 87:4063 88:207f
ata3: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
ata3: dev 0 configured for UDMA/133
scsi2 : ahci
ata4: SATA link down (SStatus 0)
scsi3 : ahci
Vendor: ATA Model: WDC WD1600JS-40N Rev: 10.0
Type: Direct-Access ANSI SCSI revision: 05
ata_piix 0000:00:1f.1: version 1.05
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata5: PATA max UDMA/100 cmd 0x30E8 ctl 0x30FE bmdma 0x30C0 irq 193
ata6: PATA max UDMA/100 cmd 0x30E0 ctl 0x30FA bmdma 0x30C8 irq 193
ata5: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:101f
ata5: dev 0 ATAPI, max UDMA/66
ata5: dev 0 configured for UDMA/66
scsi4 : ata_piix
ATA: abnormal status 0x7F on port 0x30E7
ata6: disabling port
scsi5 : ata_piix
Vendor: MATSHITA Model: DVD-R UJ-846 Rev: FB2U
Type: CD-ROM ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 10
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 10
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 2:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
SCSI Media Changer driver v0.25
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 201, io mem 0x88405400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 201, io base 0x000030a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 185, io base 0x00003080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 193, io base 0x00003060
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x00003040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
usb 2-1.2: new low speed USB device using uhci_hcd and address 3
usb 2-1.2: configuration #1 chosen from 1 choice
usb 2-1.3: new full speed USB device using uhci_hcd and address 4
usb 2-1.3: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HIDBP Keyboard 05ac:1000 as /class/input/input0
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input1
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
input: USB HIDBP Mouse 05ac:1000 as /class/input/input2
input: MOUSE SYSTEM U+P OPTICAL MOUSE as /class/input/input3
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 248k freed
Adding 1048568k swap on /dev/sda4. Priority:-1 extents:1 across:1048568k
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 19 (level, low) -> IRQ 185
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[88000000-880007ff]
Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001451fffeb7203e]
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none
Using specific hotkey driver
ACPI: AC Adapter [ADP1] (on-line)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI Error (evgpe-0688): No handler or method for GPE[1D], disabling event [20060127]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
}}
-vmware
#pre{{
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[5996]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[5996]: Module vmmon: initialized
/dev/vmmon[6009]: Module vmmon: unloaded
/dev/vmmon[6278]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6278]: Module vmmon: initialized
/dev/vmnet: open called by PID 6311 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 6315 (vmnet-bridge)
/dev/vmnet: hub 2 does not exist, allocating memory.
/dev/vmnet: port on hub 2 successfully opened
bridge-dummy0: peer interface dummy0 not found, will wait for it to come up
bridge-dummy0: attached
}}
~
~
#navi(Intel Mac)
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
